Google tricks & Other Tutorials

How to find the IP adress of the sender in Gmail, Yahoo! mail or Hotmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.


Finding IP address in Gmail

1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the headers,
* Click on More options corresponding to that thread. You should get a bunch of links.
* Click on Show original
4. You should get headers like this:
Gmail headers : name
Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is

65.119.112.245.
That is be the IP address of the sender!
5. Track the IP address of the sender


Finding IP address in Yahoo! Mail

1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail
5. You should see similar headers like this:
Yahoo! headers : name
Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
That is be the IP address of the sender!
6. Track the IP address of the sender


Finding IP address in Hotmail

1. Log into your Hotmail account with your username and password.
2. Click on the Mail tab on the top.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,
* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked
* Click on Ok button
* Go back to the mails and open that mail
5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address
Hotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
6. If you find a header with Received: from followed by a Gmail proxy like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
7. Or else if you have headers like this
Hotmail headers : name
Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (spam mail). Jump to step 9.
8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
9. Track the IP address of the sender Cool

[get this widget]

his guide will help you to place a watermark or TEXT on a video (AVI, MPEG, etc...) If you want to add a watermark, you must re-encode your video.

Tools Required:

1. VirtualDubMod a free ware, available here: Download

2. Image creation software (Windows Paint will do the job)

STEPS

1. PREPARE YOUR WATERMARK IMAGE

If your are creating a text watermark:

Open your image making software and make the background BLACK (you have to make it black to make it look translucent in ur movie) and create the text you wish to appear in the watermark, and place it on the black background. Save your image as. BMP or a .TGA file. Try to make it 200 (width) x 20 (height).

If u are putting an existing Image:

Simply open the image in Windows Paint and save it as a BMP or TGA file.

I am using This Image:



You can also use some picture but keep it in small size.

Now we are ready let us start

1: Open VirtualDubMod go to "Open Video File"



This is what you will get after file is loaded:



Now Go to VIDEO and Filters:



Now press Add:



Choose logo from list:



Now select your settings and position of your logo, To see output video click on preview.



After that Press OK and OK again.

Now Press File again and click on File Save as.



Now choose Your codec and compression mode: By pressing "Change" You can change codec and compression.



I usually Use Xvid:



Press OK and then SAVE:



Now give it some time, it will depend on speed of your processor and size of file you are converting.

Enjoy Movies with you watermarked Name on it.

[get this widget]

This is some hidden features of "VLC" player which i thought of sharing here and hope that you all like this

Well with this player you can play the movie on the Desktop as for this kindly follow the given screenshots:=====



The Important Feature is that whenever you are downloading any torrents and if you have completed more than 30% you can play the file to check the quality of the movie, video or any file but its depends completely upon the Size of the Torrent.

I have tested the same and its works 100%
Check the given below screenshots :=

This show that i am downloading the Video song of Falguni Pathak and i have Completed 21%



when you wish to play the file which is incomplete, you shall get the Avi error click on No and you will be able to play your file.
Check the given below screenshot



[get this widget]

How to hide file in jpg ?



1. Gather the file you wish to bind, and the image file, and place them in a folder. For the sake of this demonstration, I will be using C:\New Folder
-The image will hereby be referred to in all examples as fluffy.jpg
-The file will hereby be referred to in all examples as New Text Document.txt

2. Add the file/files you will be injecting into the image into a WinRar .rar or .zip. From here on this will be referred to as (secret.rar)

3. Open command prompt by going to Start > Run > cmd

4. In Command Prompt, navigate to the folder where your two files are by typing
cd location [ex: cd C:\New Folder]

5. Type [copy /b fluffy.jpg + secret.rar fluffy.jpg] (minus the brackets)

Congrats, as far as anyone viewing is concerned, this file looks like a JPEG, acts like a JPEG, and is a JPEG, yet it now contains your file.

In order to view/extract your file, there are two options that you can take

a) Change the file extensions from fluffy.jpg to fluffy.rar, then open and your file is there
b) Leave the file extension as is, right click, open with WinRar and your file is there

enjoy! ________________

[get this widget]

1) Downlaod the torrent file
2) Make sure you have a BitTorrent PSP program (BitLor, Bittornado ect...)
3) Open the Torrent with your program
4) It will downlaod
5) When download is complete go to where you downloaded it to.
6) If you see a bunch of files (40 to 70 of them) they will be like .r00 and .r01 all the way to the high number.
7) Open .r00 with WinRAR
8) Extract the file(s) inside to a location.
9) You now have the "game images" they are the CD/DVD
** Do 9A or 9B**
10) A-I) Mount the images with Daemon Tools or Alocohol 120%
A-II) Install the game and enter the CD key
A-III) To get a CD key go to the CD/DVD drive and go to a folder called "Crack" or the name of the person who pirated it.
A-IV) The CD key is in a .nfo file open it with WordPad
A-V) Add the CD key and finish the install
A-VI) Go back to the folder in the CD/DVD drive.
A-VII) Copy the .exe file from the folder (Not the of the piraters name for (Example: CoD2 would be CoD2_sp.exe))
A-VII) Go to the main folder where you installed the game and past the .exe file.
A-VIII) Select yes to over ride it
A-IX) Play the game and have fun

B-I) Burn the game image with nero or Alcohol 120%
B-II) Do the same steps from 9 A-II to A-IX

11) Some newer games now adays are harder to crack so you may need a CD hider
12) You will get instructions from the location mentioned in 9 A-III.

13) After you install the game as in 10A you run the CD hider and play the game.

***IF THE ABOVE DOESN"T MAKE SENSE MAYBE THIS WILL***
Is the game CD/DVD if it is CD it will have a few folders called "CD1" "CD2" "CD3" and how ever many CD's there are.


If the game has rar files in each of thoes folders than open up the first one in CD1 and extract the files out and do the same with the rest of the discs.

Now burn the game image (.bin, .cue, .iso ect...) from CD1 to a disc and burn CD2 image to a disc and same with the rest.

Use Alcohol 120% or Nero to burn the images to the Discs.

If it is a DVD you do the same thing but with the one file and on DVD disk

I hope this helps!

**PASSWORDS**
Most of the time if the torrent has a web site link in its name that link is the password (the whole link)


I hope this helps any new people to torrents

[get this widget]

first go to

http://www.systemrequirementslab.com/referrer/srtest

Select a product (game) from the drop-down list below.

- Click "Can you run it?" button

- Before SRTest and System Requirements Lab can analyze this computer you need to give your permission to download an ActiveX or java Plug-in component called SysReqLab.cab or SRLApplet from Husdawg, LLC.

- You may need to disable any Pop-up blocker

- Your browser's security settings must allow you to install ActiveX/Java Plug-in components.

- The browser component is not spyware or Adware.

- and then you will see the results




VERY VERY IMPORTANT FOR PEOPLE WHO DO NOT KNOW THE CONFIGURATIONS OF THEIR PC'S !!!

[get this widget]

How to use bin/cue files:


::..What are they..::
Bin files are image files of the CDs you are trying to get. They are created from various programs. Cue files are basically something that tells burning software like Nero where and how to burn these files. They aren't always needed but they do make things easier.


How to burn them

Here's what you do (using Nero, using "Frogland" as example). [ give a search on the forum...you will find latest nero program ]


- Download CDmage and check the bin for errors first. If it finds some it will attempt to correct, but the chance of burning a copy with errors is now higher.

- Open the .cue with notepad and make sure the filename on line 1 matches the filename you're trying to burn. If you want to reduce the chance of 'line 1' errors, change the filename (and the one in the cue) to something like frogland.bin, instead of one with redundant info like frogland.ripped.by.frogga.sharereactor.(FTC).share _or_be_disconnected.bin [ frogland it just a given example ]


Dont forget to check ur list as following:

- Do the filenames match now?

- Are you sure?

- Put cue and bin in the same directory

- Start Nero, select "Burn Image" from the 'file' menu (or Recorder, Burn Image in newer versions of Nero)

- Find the directory with the cue (and bin) in it.

- Click on da cue

- Change your burning options (simulation, etc) and click write

- It burns. You're done!

[get this widget]